909 LT18V Gebrauchsanweisung - Seite 17

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Trimmer 909 LT18V herunter. 909 LT18V 20 Seiten. 20v lithium ion cordless line trimmer

Seite drucken
Using the protector
The trimmer is fitted with a
wire protector. To protect
small plants etc from the
rotating cutting line. The
protector limits how close the
head of the trimmer can go
to objects when the protector
is in the lower position. To
use the protector fold it down
so that its horizontal, this keeps the line a safe distance
from the end of the protector and helps prevent damage of
small plants and trees from the line.

Using as an edger

Note:
Always remove the battery pack from the trimmer
before carrying out any maintenance or making any
adjustments to the line trimmer.
The trimmer is capable of performing light edging tasks.
To fit edger wheels
Remove the clamping knobs
from the wheel assembly
and slide/clip the wheel
assembly on the lower
shaft. With the line trimmer
head set to the line trimmer
function, fit and clamp the
wheel assembly to the left
hand side of the guard.
1. Press the head pivot
button (12) and pivot the
head so it is at its lowest
setting. ie the guard
should be now parallel
and close to the shaft.
By standing the trimmer
on the wheels the cutter
is now set for edging.
Handle rotation while edging
The trimmer has a rotating handle which makes it easier to
edge while using the handle in an uprigt positon.
1. Loosen the edging shaft rotation lock (17) and simply
rotate the handle in a 90° clockwise position, then lock
into position.

Changing a line spool

Note:
Always remove the battery pack from the trimmer
before carrying out any maintenance or making any
adjustments to the line trimmer.
1. Turn the line trimmer upside down so you have direct
access to the spool.
2. Hold the bottom of the spool firm with one hand and with
the other hand squeeze the tabs on either side of the
spool cover and remove the cover.
17