909 52371 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Rasenmäher 909 52371 herunter. 909 52371 18 Seiten. 140cc 4 stroke petrol

Seite drucken

Fuelling

IMPORTANT: Fuel goes off after about 3-4 months. If you find your lawn
mower does not start, first change the fuel in the tank with newly purchased
fresh unleaded fuel. Do not use ethanol based fuels.
WARNING. Do not refill fuel tank while engine is running
or is hot.
• Be careful not to admit dust, dirt, water or other foreign objects into the fuel.
• Wipe off spilt fuel thoroughly before starting engine.
• Ensure you DO NOT fuel the lawn mower in close proximity to any open
flames, lit cigarettes, or hot objects.
1. Unscrew the fuel tank cap (19) and pour fresh unleaded fuel into the tank
with the aid of a funnel. (Fig M )
2. Fill the tank to approximately 2.5 cm below
the lowest portion of the neck to allow for fuel
expansion. Be careful not to over fill or spill any
fuel. If this happens, wipe the spill with a
clean rag.
3. Start the engine at least 3 metres away from the
area where the fuel tank has been filled in order
to avoid the risk of fire.
18
MODEL: №. 52371
140cc 4 Stroke Petrol Lawn Mower
M.
AFTER SALES SUPPORT
1800 909 909
(toll free)
140cc 4 Stroke Petrol Lawn Mower

Adjusting the Cutting Height

WARNING: Stop the engine and unplug the spark plug before any repairs
or maintenance operations.
The mower has one lever to easily adjust the cutting height.
There are 8 height settings.
NOTE: Always try to adjust the cutting height of the lawn mower while
positioned on the area of grass you plan to mow.
It is recommended to start on a higher setting and mow a trial area of lawn
before deciding on the final cutting height position.
1. Stop the engine of the lawn mower before making a height adjustment.
To increase the cutting height pull the height adjustment lever (13)
outward towards the wheel, and move it up a notch, towards the rear
of the lawn mower. (Fig N)
2. To decrease the cutting height pull the height adjustment lever (13)
outward towards the
N.
wheel, and move it
down a notch, towards
the engine. (Fig O)
3. After adjustment,
ensure the lever is fully
located in the selected
notch.

Starting the engine

Take note of the following warnings before starting your lawn mower:
• Never allow young children to operate power tools or equipment.
• Make sure children and pets stay indoors while you're working.
• Before starting up the lawn mower, walk the area. Relocate toys, hoses,
rocks and sticks. Debris such as stones, wood chips and pieces of aged
blades can be propelled at high speeds, which can cause a fatal accident.
• Slow down and take care when mowing around corners, trees, shrubbery
or other obstacles.
AFTER SALES SUPPORT
1800 909 909
(toll free)
O.
19
MODEL: №. 52371