Galaxy Audio HS4 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Redner Galaxy Audio HS4 herunter. Galaxy Audio HS4 2 Seiten. Hot spot personal monitor
Seite druckenGAL A X Y AUDIO
Included Components
1.
HS4 x1
2.
SA-1 Stand Adapter x1
3.
Quick Start Guide x1
Setup
1
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
Stand Mounting
(Optional)
1
Attach the SA-1 to the mic stand
1.
5.33 Ohms for 3 Hot Spots
8 Ohms for 2 Hot Spots
2
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
2
Lift the HS4 over the stand, align it up
with the hole.
2.
3.
GAL A X Y AUDIO
Included Components
1.
HS4 x1
1.
2.
3.
2.
SA-1 Stand Adapter x1
3.
Quick Start Guide x1
4 Ohms for 4 Hot Spots
(The Total Load)
5.33 Ohms for 3 Hot Spots
Setup
8 Ohms for 2 Hot Spots
1
2
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
Stand Mounting
(Optional)
1
2
3
Attach the SA-1 to the mic stand
Lift the HS4 over the stand, align it up
Bring the HS4 down onto the stand
with the hole.
gently until secure.
4 Ohms for 4 Hot Spots
(The Total Load)
3
Bring the HS4 down onto the stand
gently until secure.
Q uick Start Guide
For more details on
Ohm's Law, Scan Here:
Quick Start Guide
For more details on
Ohm's Law, Scan Here: