Galaxy Audio ANY SPOT AS-1400-2P Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte Galaxy Audio ANY SPOT AS-1400-2P herunter. Galaxy Audio ANY SPOT AS-1400-2P 12 Seiten. Wireless personal monitor

Seite drucken
System Setup
STEREO
MONO
GROUP
CHANNEL
Fig. 1
STEREO
MONO
GROUP
CHANNEL
Fig. 2a
STEREO
MONO
GROUP
CHANNEL
Fig. 2b
STEREO
MONO
GROUP
CHANNEL
Fig. 3
STEREO
MONO
GROUP
CHANNEL
Fig. 4
STEREO
MONO
GROUP
CHANNEL
Fig. 5
STEREO
MONO
GROUP
CHANNEL
Fig. 6a
System Setup
Programming the Body Pack Receiver
1. Power On:
Turn the Body Pack on by turning the volume control clock-wise.
The LCD display will light up as shown in Fig 1.
MHz
2. Frequency Group and Channel Selection:
Press the "SET" button. The display will flash "GROUP". Press
or
to select a suitable frequency group number as shown in Fig. 2a.
Press "SET" again. The display will flash "CHANNEL". Press
or
to select a suitable channel as shown in Fig 2b. Make certain
that the transmitter and receiver are on the same frequency.
MHz
Note: When using multiple systems, for optimum results, set all of the
systems to the same group number and select a different channel
number for each system in that group.
MHz
3. Stereo/Mono Select:
Press the "SET" button 3 times. The stereo/mono display will flash.
Press the
MHz
4. Locking Control Selection:
Press the "SET" button 4 times until "
or
button to select Lock or Unlock status as shown in Fig. 4.
MHz
5. RF Signal Indication:
The receiver has 5 levels of RF signal
indication as shown in Fig. 5.
MHz
6. Pan Control:
Use the arrow keys in the battery compartment,
to adjust the left/right balance as shown in Fig. 6a
and 6b.
balance to left
balance to right
MHz
(Cont.)
or
buttons to select desired mode as shown in Fig. 3.
7
" lights up. Press
Fig. 6b