Galaxy Audio ANY SPOT AS-1500 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Galaxy Audio ANY SPOT AS-1500 herunter. Galaxy Audio ANY SPOT AS-1500 8 Seiten. Wireless personal monitor

Galaxy Audio ANY SPOT AS-1500 Benutzerhandbuch
Bodypack Receiver Programming
Adjusting Left and Right Balance:
Press
or
to adjust left and right earphone balance,
as shown in Diagram
Select a Group and Channel:
Press "SET" button, "GROUP" will flash, press
select suitable frequency group number, as shown in
2
Diagram
on the left. Then press "SET" again,
"CHANNEL" flashes, press
channel, as shown in Diagram
Battery Indication
Four level battery status indicator, as shown in Diagram
4
. Replace batteries when indicator blinks. "Low
Battery" LED (page 4) will also light at this point.
Equalization Setup:
Press "SET" button 3 times, "EQ" will flash, press
to select EQ mode. "ON" (Offers more high-end
response: 6dB boost at 10KHz), "OFF" (Is Normal, Flat),
as shown in Diagram
Limiter selection:
Press "SET" button 4 times, "LIMITER" will flash, press
or
to select Limiter "On" or "Off", as shown in
6
Diagram
.
Locking Selection:
Press "SET" button 5 times, "
to select Lock or Unlock, as shown in Diagram
Stereo/FOCUS selection:
Press "SET" button 6 times.
stereo operation, the left-right signals are available as
usual. When the receiver is set to FOCUS operation, the
left-right signals are mixed and are available as a mono
signal in both headphone channels. Use the
buttons to adjust the relative levels of the two separate
channels in the mixed mono signal, as shown in
8
Diagram
. Press "ESC" after any programming to exit
menu and return to full display.
Full Display
Displays Battery Status, RF/Audio Level, Stereo/Mono
Mode, EQ Mode, Lock Status, Limiter Mode and
Selected Frequency, as shown in Diagram
1
. "-0-" indicates center balance.
or
to select suitable
3
on the left.
5
.
" will flash, press
When the receiver is set to
or
to
or
or
7
.
rocker
/
9
.