Galaxy Audio Any Spot AS1000 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Empfänger Galaxy Audio Any Spot AS1000 herunter. Galaxy Audio Any Spot AS1000 20 Seiten. Wireless in ear monitor

Seite drucken

11. With the receiver power switch off and the volume control

set to minimum, plug in a set of ear buds to the 1/8" stereo

Ear Bud output jack. Fit the ear buds snugly into your ears

and adjust for a comfortable fit.

12. Switch on the power to the receiver and note the LED. It

should come on Red and then fade out to Green. This

indicates a signal is being received from the transmitter.

13. Starting from minimum, slowly increase the volume control

until the desired level is achieved. If both inputs on the

transmitter are in use, you may need to adjust the balance

between the MIC and LINE volume controls.

14. Walk around the area where the receiver will be used to

ensure you have good coverage with no interference. If any

interference is heard, select a new frequency program number

on both the transmitter and the receiver until a clear frequency

is found.

15. If the audio source levels provided to the transmitter

change, the volume controls on the transmitter may need

to be re-adjusted for optimum performance.

AS1000