dynarex 12005 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung dynarex 12005 herunter. dynarex 12005 9 Seiten. Ltc 5 function ultra low bed

Seite drucken

EQUIPMENT OPERATION

POSITIONING THE BED

To position the bed unlock the casters. Once the bed

is in its desired location, lock all casters in place.

USING THE HAND PENDANT

The UP arrow (▲) indicates raising the corresponding

parts of the bed.

The DOWN arrow (▼) indicates lowering the corre-

sponding parts of the bed.

Use button 1 and 2 to

adjust the backrest up or

down.

Use button 3 and 4 to

adjust the kneebreak up

or down.

Use button 5 and 6 to

adjust the backrest and

kneebreak up or down

simultaneously. (Auto

Contour feature)

Use button 7 and 8 to

raise or lower the bed

platform.

Use button 9 and 10

to tilt the bed into re-

versed Trendelengburg

and Trendelenburg posi-

tions.

2.1 ENTRAPMENT SAFETY MEASURE

The bed is equipped with an Entrapment Safety

Measure. If the bed platform is higher than 12.5" from

the fl oor, long press button 8 will lower the bed to

12.5". To continue lowering the bed, release and long

press button 8 again. Ensure no body parts or

obstacles are within the bed's moving range. Ensure

the bed rails/bars are raised.

2.2 RESETTING THE BED

Where a connection fault is identifi ed and rectifi ed,

the control system will require a reset in order to

operate again. If the fault occurred on the motors for

platform profi ling, lower the corresponding motor to

the lowest position for reset; where the fault occurred

on the motors for bed height adjustments, raise the

bed to the highest position for reset.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

EQUIPMENT OPERATION

ADJUSTING THE EXTENDED

HEEL LIFT

The end foot section can be adjusted manually to

further alter the kneebreak angle.

1. Grip the end section of the bed platform. Lift up

slowly to the preferred height. Ensure there is an

audible click indicating that the deck is locked in

place within the Ratcheting Bracket.

2. To lower the end deck to its original position, lift

up to the highest position and slowly lay the bed

platform back down.

Long-Term Care Bed • D500 • 5 Function Ultra Low Bed (Reorder No. 12005)

(Continued)

FOLDING AND TRANSPORTING

THE BED

The bed can be disassembled and transferred in a

compact manner using the transport bars.

1. Reverse the bed installation procedure to disas-

semble the bed into four sections, the headboard,

the footboard, the upper and lower bed decks.

Keep the screws and washers.

2. Position the transport bar with the deck connection

brackets facing upwards. Insert a transport bar on

each of the headboard connection brackets.

3. Insert the footboard into the other side of the

transport bar.

4. The folded bed can be transported with the

casters on the head and footboard. Reverse the

procedure to reassemble the bed.