dynarex 12961 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mobilitätshilfe dynarex 12961 herunter. dynarex 12961 3 Seiten. Universal pivot assist rail

Seite drucken

MOUNTING INSTRUCTIONS

1. Before installing the rails, the bed should be in the flat

position. The carton should include 2 bed rails as shown:

2. Clamp the rail bracket over the edge of the bed deck with

the vertical sliding steel plate positioned on the inside of

the bed frame. Tighten the two Allen screws and rotate

the turn knob underneath the bracket clockwise until the

rail is secured in place. Repeat the procedure to install the

bed rail on the other side.

The rails can be positioned at the head or foot section.

Universal Pivot Assist Rail (Reorder No. 12961)

RAIL OPERATION

RAISE BED RAIL: Pull the bed rail upwards until the rail is

securely locked in place.

LOWER BED RAIL: Press the release button and slowly

lower the bed rail to its lowest position.

WARNINGS

• Read the instructions carefully before installing.

• Before operating, ensure that the bed rails are assembled

and installed correctly as instructed. Ensure that all the

attaching hardware are tightened and that the bed rails

are securely in place. Inspect the hardware frequently to

make sure all the components are tightened securely.

• DO NOT use the bed rails as a handle for getting into or

out of the bed. This could result in personal injury and

damage to the bed rails.

• DO NOT apply side pressure to the bed rails. This could

deform or even break the bed rails.

• DO NOT use the bed rails as a push handle for moving

the bed. This could deform or even break the bed rails.

• DO NOT use the bed rails if proper installation cannot be

achieved. Contact your dealer or manufacturer.

Universal Pivot Assist Rail (Reorder No. 12961)