iHealth View Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Blutdruckmessgerät iHealth View herunter. iHealth View 12 Seiten. Wireless blood pressure wrist monitor

Seite drucken

3. Then the cuff will be slowly inflated. The blood pressure and pulse will be measured during inflation

Inflation will stop as soon as the blood pressure and pulse rate have been calculated and displayed on

the screen. The result will be automatically stored in the memory, and all results will be uploaded to the

App automatically upon the next successful Bluetooth connection.

SYNC TIME AND RESULTS VIA BLUETOOTH

Connect to iOS Device via Bluetooth

• Press the START/STOP button for 3 seconds, the Bluetooth indicator will begin flashing.

• Enable the Bluetooth on your iOS device(Setting->General->Bluetooth->On) .

• Launch the "iHealth MyVitals" app to initiate the connection, the Bluetooth indicator will light up and stop flashing when a

successful connection is established.

• When sync is processing, the sync indicator flash

Connect to Android Device via Bluetooth

• Press the START/STOP button for 3 seconds, the Bluetooth indicator will begin flashing.

• Enable the Bluetooth on your Android Device.

• When using the monitor for the first time, you should pair the monitor to the Android device. Go into your device's setting to

pair it with your Android device. Check the Bluetooth menu for the model name of your monitor (BP7SXXX) to appear, and then

select it to pair. This may take up to 30 seconds and your monitor's Bluetooth indicator will light up when a connection has been

established.

• Launch the "iHealth MyVitals" app to sync with your monitor.

• When sync is processing, the sync indicator flash

• Please repeat these steps when you switch to another Android device with the monitor.

Remember to:

1. Make sure your wrist size is within cuff circumference; see the range in "SPECIFICATIONS"

2. Measure on the same wrist each time.

3. Stay still and calm for one to one and half minutes before taking a blood pressure measurement. Prolonged over-inflation of

the bladder may cause bruises of your wrist.

4. Keep the cuff clean. Cleaning the cuff after every 200 times of usage is recommended. If the cuff becomes dirty, clean it with

a moistened cloth. Do not rinse the monitor or cuff with running water.

5. Press the "START/STOP" button at any time to interrupt a measurement.

Note: Physical activity, eating, drinking, smoking, excitement, stress, and many other factors influence blood pressure results.

SPECIFICATIONS

1. Product name: iHealth View Wireless Blood Pressure Wrist Monitor

2. Model: BP7S

3. Classification: Internally powered; Type BF applied part; IP22, No AP or APG; Continuous operation

4. Machine size: approx. 2.8"×2.9"×0.7" (72mm×74mm×17.6mm)

5. Cuff circumference: 5.3"- 8.7" (13.5cm-22cm)

6. Weight: approx. 4.2oz(120g)(including cuff)

7. Power: DC:5.0V

1.0A, Battery: 1*3.7V

and

, when sync is finished, the sync indicator lights up

and

, when sync is finished, the sync indicator lights up

Li-ion 400mAh