DCA Q1U-FF02-160 Betriebsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung Handbuch für Mischpult DCA Q1U-FF02-160 herunter. DCA Q1U-FF02-160 6 Seiten. Electric mixer

Seite drucken
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
18. Do not use tool if switch does not turn it on or off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
20. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
Service
24. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
VOLTAGE WARNING:
Before connecting the machine to a power source (receptacle, outlet, etc.), be
sure the voltage supplied is the same as that specified on the nameplate of the
machine. A power source with voltage greater than that specified for the machine
can result in SERIOUS INJURY to the user, as well as damage to the machine. If
in doubt, DO NOT PLUG IN THE MACHINE. Using a power source with voltage
less than nameplate rating is harmful to the motor.
-3-

SPECIFICATIONS

Rated Power Input
No-Load Speed
Net Weight
※ Due to the continuing program of research and development, the specifications
herein are subject to change without prior notice.

ADDITIONAL SAFETY RULES

1.
Always hold the tool firmly and provide for a secure stance. The power tool is
guided more secure with both hands.
2.
Make sure the stirring paddle is mounted securely before starting operation.
3.
Always wait until the tool has come to a complete stop before placing it down or
changing the direction of its rotation.
4.
Keep hands away from rotating parts.
5.
Do not use for explosive materials (e. g. easily inflammable solvent). Power tools
produce sparks which could ignite developing vapours.
6.
Do not use a tool with a damaged mains cable. Do not touch the damaged cable
and pull the mains plug when the cable s damaged while working. Damaged
cables increase the risk of an electric shock.
7.
In case the tool should fall into the material to be stirred, pull the mains plug
immediately and have the tool checked by an after-sales service agent. Material
that has penetrated the tool can cause damage and lead to an electric shock.
8.
Always use the auxiliary handle supplied with the tool. Loss of control can cause
personal injury.
SAVE THESE INSTRUCTIONS.
WARNING! MISUSE or failure to follow the safety rules stated in this instruction
manual may cause serious personal injury.
1010W
780 r/min
3.5 Kg
-4-