DCB 8 DBRA Handbuch zur Einrichtung und Konfiguration - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch zur Einrichtung und Konfiguration für Netzwerk-Hardware DCB 8 DBRA herunter. DCB 8 DBRA 17 Seiten. Data bridge card

Step One, setting up the card mode for 56 Kbps or 64 Kbps operation:
The 8DBRA card can be set to over sample at either 56 Kbps or 64 Kbps. All 8 ports share the
same sampling rate of either 56 Kbps or 64 Kbps. After the card is changed from one rate to the
other, it is necessary to reset the card.
When the 8DBRA card is reset, all card mapping is set to default (no mapping). The card reset
takes about 50 seconds to complete. Be patient.
Below are the screens showing the "M
SLOT 5 8DBRA P1
Version
: SW V1.02.01 03/31/2011
HW Ver.B
Backup Mode: NO
(64K)
[DISPLAY]
T -> Port Map Configuration
C -> RS232 Configuration
SLOT 5 8DBRA P1
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
Mode: 64K
Note: Change Mode will reset card
Card reset celars all 8DBRA card mapping (8DBRA ports and time slots to Virtual Ports). The
reset process takes a bit less than one minute.
Mode Setup" selection, the 56/64K selection.
=== Port Menu ===
FPGA Ver.B
[SETUP]
M -> Mode Setup
B -> Backup Setup
K -> Port Map Setup
S -> RS232 Config Setup
G -> Upgrade Firmware
=== Mode Setup ===
Page 3
DCB, Inc.
2949 CR 1000 E
Dewey, Illinois
61840
217.897.6600 Tel
800.432.2638 Toll Free
217.897.1331 Fax
www.dcbnet.com
13:51:15 04/03/2011
13:51:30 04/03/2011