DCB IP-6700 Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware DCB IP-6700 herunter. DCB IP-6700 3 Seiten. Configuring the ip-6700 t-1 over ip
Seite druckenConfiguring the IP-6700 T-1 over IP
The IP-6700 is easily configured to transport up to 4 E-1 or T-1 signals with timing plus Ethernet
traffic over an IP network. This is a cost effective way of migrating to an IP network from existing
voice and data networks using existing TDM based equipment.
Although the IP-6700 may be used in point-to-multipoint (one to many), multiple-T-1, and other
complex applications, this applications note describes configuring the unit for a simple point-to-
point T-1 or fractional T-1 link using any IP path between the two IP-6700 units.
The information on the next page must be gathered prior to the configuration process. Default
and commonly-used values may be used for other configuration variables. The firewalls must
pass TCP/IP as well as UDP/IP packets destined for the IP-6700 addresses.
This diagram is available in a larger version on the last page of this applications note.
The IP-6700 cell bundle application note should also be consulted to determine the optimum
bundle size for any given installation.
Quick Start Guide
Overview Diagram
Data Comm for Business, Inc.
2949 County Road 1000 E
Dewey, IL 61840
217-897-6600, FAX 217-897-1331
Outside Illinois: 800-4DCBNET
http://www.dcbnet.com