iHerz iWind Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Produkt für die Atemwege iHerz iWind herunter. iHerz iWind 17 Seiten. Compressor nebulizer system

ing instructions, or as recommended by your Physician.

• Make sure the power switch is in the "OFF" position.

• Unwrap power cord.

• Place compressor so that the rubber feet are resting on a level, sturdy

surface and upon which the controls can be easily reached when seat-

ed. Never block the air openings of the product or place it on a bed or

couch where the air openings may be blocked.

• Plug power cord into an appropriate wall outlet.

Compressor/nebulizer must be operated on the specified power

source to avoid risk of electric shock and damage to the com-

pressor. See instrument bottom panel for power details.

Wash hands. Ensure hands are dry.

• Assemble clean nebulizer parts by

placing baffle down in medication cup.

• Open the medicine cup cap and put the

medicine from medicine vial into the

medicine cup (А). Close the medicine

cup cap tightly (В).

• Attach one end of the tube to the

medicine cup (С).

• Connect another end of the nebulizer

tubing to the compressor air-outlet

connector (D).

(NOTE: during high humidity weather

conditions, condensation, water build

up can occur in the nebulizer tubing).

• Assemble mouthpiece, or mask and

T-piece (if applicable) and insert into the

top of the nebulizer cap (E, F).

• Press the power switch "ON" position

to start the compressor as aerosol being to flow, inhale deeply and

slowly, hold & then exhale slowly. Follow instructions as given by your

physician. If treatment needs to be interrupted, simply press power

switch "OFF".

• When treatment is complete, turn unit "OFF" by pressing the power

switch to the "OFF" position. Unplug the unit from the wall power outlet.