Autool CT180 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Prüfgeräte Autool CT180 herunter. Autool CT180 16 Seiten. Fuel injector tester

Structure

Overview

A-Power socket & ON/OFF Switch & Fuse

For introduce AC power into the unit, and there's a fuse socket, and a ON/OFF switch to turn on/off the

unit.

B-Control/display panel

All the data will be shown on this touch screen, and adjustment of parameter could be done by finger

tap. Refer to the Control Panel section for details

C-Control knob

Fast Navigation and control knob, turn left/right to switch between parameters and press to confirm.

D-Fuel filler port

refill.

E-Fuel level indicator

Note the fuel level at refilling, and before testing. The fuel level shall be checked at a regular basis,

always make sure the fuel level over MIN line, otherwise, pump faulty could be resulted.

F-Fuel drain port

If the fuel becomes dirty, drain the fuel, pour the fuel through a strainer and refill it back in from the Fuel

filler port.

G-Fuel supply hose

Used to introduce fuel to the Fuel distributor.

H- Fuel distributor assembly

Different type of fuel distributor assembly may come with the unit according to changes of hardware

configuration. The Fuel distributor assembly is used to distribute fuel into mounted injectors for testing.

I-Return fuel connector

Used for introduce return fuel from the vehicle at on-vehicle-testing function.

J-Sockets for pulse signal cable

Note: The illustrations in this manual may be slightly different from the actual product!