Autool X60 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Autool X60 herunter. Autool X60 7 Seiten. Car obd multi-function meter
Auch für Autool X60: Benutzerhandbuch (11 seiten)
Seite drucken
Turn right/left of function button to quick select from main
screen. In setting mode, turn right/left to choose menu.
Press down in the middle to confirm. Long press menu
button in the middle to exit or go back.
Product Installation and Use
Connect one side of OBD cable with car OBD port, the
other side with X60 OBD port.
After connection with host, start the car and wait X60 to
connect with vehicle. Connecting successfully, the host
ticks, and X60 displays vehicle protocol. Then, it will show
parameter setting for the first use.
International universal OBD
plug protocol stipulated by
SAE:
Note:
The automobile dash-board must be kept clean, if there is
wax on it, the double adhesive panel may not be
pasted on it, please clean it with a hot towel and then
start installation. When you install, heat the instrument
panel by hot blowing air, which can make the best achieve
effect.
4
display accurately.
Voltage warning - To remind the driver if the battery is
under charge.
Color of number - 7 colors to choose.
Speed to zero - In idle speed mode, speed will display
zero if it is lower than the scheduled.
Fuel consumption adjustment - Average fuel
consumption is less the actual. If it displays more,
adjust the percentage to be smaller, and vice versa.
Reset - X60 will revert to the initial state.
Display Setting
To set display
In working condition, 4 types of information will display.
They corresponds to the following content:
9