Gale 3090 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Subwoofer Gale 3090 herunter. Gale 3090 12 Seiten.

AP134793 (Koda) Gale 3090 Owners' Manual.qxd

Attaching feet to your subwoofer

Your 3090 subwoofer comes with feet and spikes which should be fitted as outlined

below.

The spikes attach to the bottom of the feet (as shown below left).

There are eight pilot holes on the bottom of the speakers. The feet are located and

secured here with the wood screws supplied (below right). Level as required.

Connecting via Line Input

Fig. 3

22/04/2003

15:00

Getting Started

Fig. 4

Page 8

Connecting via High Level Connections

If your amplification system has a dedicated subwoofer line output then you should

connect your 3090 via the Line Input on the rear panel using a good quality phono

lead. Note that if your amplification system has a mono subwoofer line out then use

the Left/Mono socket on your 3090.

Connecting via High Level Connections

Do not compromise the performance of your system by using inferior quality cables!

Gale recommends that high quality cables of 16 gauge or higher be used. Your

professional dealer will give you good advice.

Observing polarity is of the utmost importance while connecting your loudspeakers.

Ensure that the red (+) terminals on your amplification system are connected to the

red (+) on the subwoofer, and black (-) on your amplification system to black (-) on

your subwoofer.

Important Note: Always unplug all A.C. powered components before making any

loudspeaker or component connections. This will avoid the risk of electric shock or

damage to your equipment.

Your new unit will require a total of approximately 10 hours of normal use to allow

the components to settle into their working routine and reach their optimum

performance.