9dot 8INJ Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Handbuch für Laborausrüstung 9dot 8INJ herunter. 9dot 8INJ 14 Seiten.
Seite drucken
Installation
The 8INJ is designed for installation in a 19 "rack cabinet, however the fixing flaps can be rotated 90 ° for wall mounting.
IMPORTANT NOTE: Use only the parts supplied with the device for fixing the fins; the use of different parts can cause
irreparable damage to the device.
Before turning on the device it is advisable to connect the grounding terminal, fix the chassis to the cabinet or to the wall,
insert the chosen GigaKey keys and connect the signal cables, in particular:
•
Wire the power supply.
•
Connect the ethernet cables.
•
Connect the power supply pins of the power supply to each port, paying attention to the polarity adopted.
•
Connect the power supply to the electricity.
These cables are not supplied with the 8INJ.
Typical configuration
A typical configuration that can be obtained with this device is to combine it with NCore Lite, an Active Power Station 9dot
with 8 configurable power outputs for different voltages that allows modular power supply with ACDC or DCDC and has a
battery charger.
By powering an 8INJ with NCore Lite we can improve the benefits of both devices by remotely managing each output port and
thus having remote and indirect control over the input power of the 8INJ's PoE ports. That is, by controlling the NCore Lite
solution will allow you to control 8INJ ports as well.
This configuration transforms a PoE injector device into a remotely manageable integral power solution.
8INJ MANUAL
Figure 4 – configuration example 8INJ supplied by NCore Lite
10
VER. 2 REV. 0