Autool CS520 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Diagnostische Ausrüstung Autool CS520 herunter. Autool CS520 10 Seiten. Code reader & obd ii scanner
Seite drucken
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in
different countries, the trademark is
the other trademark, service logo, domain, icon and company
name mentioned in this manual, they shall all belong to AUTOOL
and its other affiliated company, in other countries without the
registration yet of these trademark, service logo, domain name,
icon and company name of AUTOOL, here we announce they are
owned by AUTOOL. Any company or person shall not use the
trademark, service logo, domain name, icon and company name
of AUTOOL before getting approved by AUTOOL with written
certificates. Please visit our website www.autooltech.com or
email at [email protected] to contact us.
Safety Precautions and Warnings
To avoid personal injury or damage to vehicles and/or the
scanner, please read this instruction and the following safety
precautions at a minimum whenever testing a vehicle:
Test the vehicle in a well ventilated area: Exhaust gases are
poisonous.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away
from all moving or hot engine parts.
Block front of the drive wheels and never leave the vehicle
unattended while running tests.
Pay extreme attention when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These
components create hazardous voltages when the engine is
running.
.With regard to
1
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the
parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/
electrical fires nearby.
Don't connect or disconnect any test equipment while the
ignition is on or the engine is running.
Keep the scanner dry, clean, free from oil/water or grease. Use
a mild detergent on a clean cloth to clean the outside of the
scanner when necessary.
General Information
On-Board Diagnostics (OBD) II
The OBD II system is designed to monitor emission control
systems and key engine components by performing either
continuous or periodic tests of specific components and vehicle
conditions. When a problem is detected, the OBD II system turns
on a warning lamp (MIL) on the vehicle instrument panel to alert
the driver typically by the phrase of "Check Engine" or "Service
Engine Soon". The system will also store important information
about the detected malfunction so that a technician can
accurately find and fix the problem.
Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are codes that are stored by
the on-board computer diagnostic system in response to a
problem found in the vehicle. These codes identify a particular
problem area and are intended to provide you with a guide as to
where a fault might be occurring within a vehicle. OBD II
2