Autool HTS 558 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Serviceausrüstung Autool HTS 558 herunter. Autool HTS 558 8 Seiten. Walnut sand decarbonizing machine
Seite drucken
What is Carbon deposit?
Carbon deposit is the black gel that caused by the repeated high temperature
of the engine running, which is the the residual rubber in the fuel injector, the
throttle valve, the oil circuit, the spark plug, the cylinder head, the inner wall
and other components caused by insufficient combustion of the gasoline in the
cylinder. Generally, vehicles need to be cleaned of engine carbon when
running for 2 years or driving to 4W kilometers. By removing the throttle,
carbon deposit can be seen clearly.
How does the carbon deposit produce?
1. The vehicle runs at idle speed because of traffic jams, which tends to
produce carbon deposit.
2. The fuel quality is substandard, which cannot be fully burnt in the co
mbustion chamber of the engine, thus generating carbon deposit.
3. The engine workload changes at any time.
4. Driving with low rpm and high gear, while ignoring synchronization of
the throttle and rpm, causes the engine to overload, and thus forming ca
rbon.
Why need to decarbonize?
1. The vehicle starts to power drop, waste fuel, engine noise and idle s
peed. .
2. Difficulty in start, acceleration, engine shake, and excessive exhaust.
3. The carbon hard block falls off, which causes the engine to fail to sta
rt, or falls into the combustion chamber, causing the combustion chambe
r wall to wear, eventually damages the engine.
Why do choose AUTOOL HTS 558 to decarbonize?
1.
By using natural organic material - walnut sand, no chemicals, which will
not damage the engine.
2.
Simple and efficient operation. It is
through high-pressure airflow, and the high-pressure high-speed sand will roll
and collide in the closed intake pipe, thereby impacting the carbon deposit on
the intake valve and the cylinder wall.
sprayed into the engine intake pipe