DCD 61400-000 Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Industrielle Ausrüstung DCD 61400-000 herunter. DCD 61400-000 14 Seiten. Lineman lasher
Seite drucken3. Adjusting the Wire Spool Brake:
To adjust the brake on the wire spool, insert brake adjustment wrench into center of
wire spool spindle, tighten brake only enough so wire spool will not turn freely when
loaded with a full coil of wire. This adjustment does not need to be done each time
you load lasher with wire.
4. Setting the Front Gate:
4a) To open front gate, pull front cable roller until lock releases. Then swing
roller completely open to clear the cable.
Page | 6