DCE ANS-205 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Router DCE ANS-205 herunter. DCE ANS-205 5 Seiten. 5-port industrial 10/100 mbps ethernet switch
Seite druckenFeatures:
•
Automatic MDI / MDI-X crossover for plug-and-play
•
Each port supports both 10/100 Mbps speed auto negotiation
•
Store-and-forward architecture
•
Full duplex IEEE 802.3x and half duplex backpressure flow control
•
1.4Gbps high performance memory bandwidth.
•
Integrated look-up engine with dedicated 1 K unicast MAC addresses.
•
Supports +10 ~ +30V DC voltage
•
Supports operating temperatures from –30 ~ +75 ℃
•
DIN rail mount for industrial usage
•
1.4Gbps high performance memory bandwidth.
Specifications:
•
Compatibility:IEEE 802.3, IEEE802.3u, IEEE802.3x
•
Interface: 10/100 Base-T
•
Port: 10/100 Mbps x 5 (Shielded RJ-45 Jack)
•
Provides LEDs for network and power monitoring
•
ESD Protection:
8KV Contact Discharge
15KV Air-Gap Discharge
•
Cables:
10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
100 Base-T (Cat.5 UTP cable; 100m Max.)
•
Environment:
Operating temperature: –30 ~ +75 ℃
Storage Temperature: –40 ~ +85 ℃
Relative Humidity: 10% to 90% non-condensing
•
Dimensions: 32.30 x 99.00 x 77.50 mm (W x H x D)
•
Power requirements: +10 to +30V DC (Removable Terminal Block)
•
Low power consumption: 0.052A@24VDC, +/- 5% arrowed.
Introduction:
The ANS-205 has 5 Ethernet Switching ports that support
10/100Base-T, with a 10/100M auto-negotiation feature and
auto MDI/MDIX function.
It can connect 5 workstations and automatically switches
the transmission speed (10 Mbps or 100 Mbps) for
corresponding connections. The flow control mechanism is
also negotiated.
LEDs embedded in RJ-45 jacks make for easy monitoring.
Port connectors are shielded RJ-45. A power source for +10
to +30VDC is required.
ANS-205 User's Manual (Version 1.6,Oct/2004) --------------- 1
(Worst-case test: All five ports link at 10BT)