Autopage C3-RS-915 LCD Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Autoalarm Autopage C3-RS-915 LCD herunter. Autopage C3-RS-915 LCD 17 Seiten. Professional 2-way lcd remote car starter & alarm system with built in temperature & voltage sensor and two-way serial port data link

Seite drucken

SVMASTER

3. While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle

security system.

For LCD transceiver – 2

a. Press and hold

button.

b. The text

c. Press

d. Press

button to select the option you would like to adjust CAR 1 or CAR 2 for further operation.

Caution: If the LCD transmitter does not function. Please insure it is set to operate car #1

X. Clear the Flash Icon and Melody Sound:

the next time the Ignition is cycled to the ON position.

Y. Stop The Trigger Melody Sound:

through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop

melody sound only.

Z. Vibration / Melody Mode:

Press and hold the

scroll through the menu. Scroll to the word "

press the trunk button once to enter programming. Press the

Vibrate). Once a setting is chosen. Press the

A. TO REMOTE START THE VEHICLE:

When you want to start your vehicle,

1. Press

button once on the transmitter.

2. The parking light will activate to indicate the remote start received the signal.

3. The engine will start in approximately 5 seconds.

4. Once the engine is running, after couple seconds the parking lights will turn on and the climate

controls will activate and adjust the vehicle's interior temperature to your preset setting. (While the

vehicle is running, the "minutes" digit on the LCD screen will flash and the will indicate countdown

timer based on the 5, 10, 20 or 30 minute run time set up by your installation center.)

5. The vehicle will run for a programmable 5 to 30 minute cycle before shutting down. (When the

unit shuts off the countdown timer will turn off and the transmitter will play a melody.)

NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions

exists:

1. The hood is opened.

2. The brake pedal is pressed.

3. The optional remote start enable toggle is switched to the "OFF" position. (If installed)

4. The gear selector is in any gear other then "PARK" or "NEUTRAL".

SAFE START (Child safety mode)

Factory default is set to press the

feature to eliminate an accidental remote start:

1. The user presses the transmitter

2. The user presses the transmitter

NOTE: Contact your installing dealer to activate this feature.

B. OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START:

To operate the vehicle while the engine is running from the remote start,

1. Insert the ignition key and turn it to "ON" (not the start) position.

SVMASTER

C3 RS915 REV. O1

car operation :

button of LCD remote for 1 second until 2 beeps sound and then release the

will flash on the LCD screen, press

button to move up or down in the menu, find CAR SELECT on the menu.

(see advanced users menu for more info)

button until 2 beeps are heard. You will see the word

REMOTE START OPERATION:

button once on the transmitter to start the vehicle. You can program this

buttons twice within 3 seconds to start the vehicle. or

and

button to enter the menu.

The Transmitter will reset the flashing icons

While triggering the alarm the LCD screen will alert the user

Vibrate". When you see the word "Buzzer Vibrate",

button to change the setting. (Buzzer, BZ VIB,

button to confirm.

buttons at the same time to start the vehicle.

http://www.msvmaster.lv

.Press the trunk button

http://www.msvmaster.lv