High Tech Pet BE-500 Installations- und Betriebshandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Haustierpflegeprodukt High Tech Pet BE-500 herunter. High Tech Pet BE-500 17 Seiten. Wire and flag kit
Seite drucken
Splicing the Boundary Wire: You may find the included improved
waterproof wire splices useful in connecting individual lengths
of wire or twisted wire. To use these connectors:
Push the two ends of the wires into the outer two holes
1.
in the splice. View from the bottom to make sure the
wires are fully inserted.
2.. Using pliers squeeze the top black button down solidly until it
bottoms out.
STEP 5: Test Your System
Switch the Base Station Transmitter ON. Take your Receiver
Collar and walk the entire boundary ensuring that the collar
continues to beep along the entire perimeter. Also check the
lengths of twisted wire to make sure that the field is inactive in the
areas where they are used. If the collar picks up a signal from the
twisted length, the basic layout is probably incorrect
-- review the discussion of single and double loop layouts. If
you are using a single loop layout, twisted wire can only be
used at the base station, or at the feed from the primary loop
to another primary loop (example: small loop within a large
loop).