High Tech Pet BE-500 Installations- und Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Haustierpflegeprodukt High Tech Pet BE-500 herunter. High Tech Pet BE-500 17 Seiten. Wire and flag kit
Seite drucken
For the system to work properly, the wire must make a
continuous loop. The signal is transmitted from one
terminal of the transmitter through the wire and back to
the other terminal. Twisting two adjacent sections of the
wire loop cancels the signal along the twisted length. So,
use the twisted wire from the transmitter out to the
exterior loop as shown in Figure 8. This allows the dog to
cross the area without receiving a correction. Use other
lengths of twisted wire to connect smaller boundaries around
plants, pools, and other pet restricted areas.
BASIC CONTAINMENT FIELD
TWISTED WIRE AS LEAD IN FROM
TRANSMITTER TO ACTIVE FIELD
Single Loop Limitations
Note however that the basic single loop containment layouts
shown in Figure 8, cannot have a gate or opening in the fence
where the dog can walk or be transported out of the loop. To
let the dog out of the basic containment field, you must turn off
the base transmitter, or interrupt the electrical signal flowing
through the wire by inserting a switch in the loop. Using a switch in
the loop creates a break in the wire which will be
detected by the base transmitter and will result in an audible
alarm as long as the switch is open. However, it does work,
and the dog will learn that the sound of the alarm means the
containment field is off
TWISTED WIRE
FIELD WILL CANCEL
Figure 8
.
FIELD WITHIN A FIELD
USE OF TWISTED WIRE TO PROTECT
SMALL AREAS WITHIN THE MAIN BOUNDARY
TWISTED WIRE
FIELD WILL CANCEL
TWISTED WIRE
FIELD WILL CANCEL