Dynasty EF67B Series Installationsanleitung und Betriebsanleitung für den Eigentümer - Seite 4
Blättern Sie online oder laden Sie pdf Installationsanleitung und Betriebsanleitung für den Eigentümer für Innenkamin Dynasty EF67B Series herunter. Dynasty EF67B Series 8 Seiten. Wall mounted electric fireplace
TOOL REQUIRED
Magnetic Phillips Screw Driver
Rotary Hammer
UNPACKING THE ELECTRIC FIREPLACE
WARNING! Do NOT use this Electric Fireplace if any part has been under water. Immediately call a
qualified service technician to inspect and to replace any part of the electrical system if necessary.
Keep plastic wrapping away from children.
● Open the packaging carefully and remove the foam.
● Remove and discard the plastic bag.
● Be responsible when handling the packing materials.
● Keep the original packaging for future transport and/or storage.
● Check all accessories are got before you keep the packing.
LOCATING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a location
ensure that the general instructions are followed. For best results, install out of direct sunlight. Power supply service
must be either completed or placed within the electric fireplace prior to finishing to avoid reconstruction.
WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the electric fireplace.
Clearance to Combustibles
Sides ............................................8 in. (200 mm )
Floor ...........................................15 3/4 in. (400 mm )
Top .............................................. 8 in. (200 mm )
Back ............................................. 0 in. ( 0 mm )
CEILING
200mm
8inch min
200mm
8inch min
200mm
8inch min
400mm
min
15 3/4inch
FLOOR
Fig. 1