Emerson PACSystems RX3i Schnellstart-Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Messgeräte Emerson PACSystems RX3i herunter. Emerson PACSystems RX3i 18 Seiten. Canopen master
Auch für Emerson PACSystems RX3i: Schnellstart-Handbuch (19 seiten)
Seite drucken
Initial Configuration
1. Using PAC Machine Edition (PME) software, configure the CPE302 in
an RX3i target.
Note: If you intend to use the module's embedded Ethernet
interface, you will probably need to assign it a new IP
address. To configure the embedded Ethernet interface in
Machine Edition, expand the CPU slot to display the
Ethernet daughterboard. The Settings tab for the
embedded Ethernet module contains IP Address, Subnet
Mask and Gateway IP Address (see the following diagram).
Consult your network administrator for the proper values
for these parameters.
Figure 3: Configuration of the Ethernet Port on CPE302
14
PACSystems™ RX3i Central Processing Unit IC695CPE302
GFK-3038B