Dynasty Fireplaces DY-BTW60 Installations- und Betriebsanleitung für den Hausbesitzer - Seite 10

Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für den Hausbesitzer für Innenkamin Dynasty Fireplaces DY-BTW60 herunter. Dynasty Fireplaces DY-BTW60 16 Seiten.

Seite drucken

1. Remote Control

Fix the 4pcs ST4X25 screws on the wood block. Make sure the front of the firebox is not

STEP 5.

lower than the surface of the wall.

Carefully spread the small crystal stones across the fuel bed. Then evenly arrange the

STEP 6.

larger crystal stones along the inset window ledge at the front of the firebox.

The next step requires installation of a GLASS panel! The manufacturer recommends

that two adults install the glass panel. Always use extreme caution when handling

glass. Failure to do so could result in personal injury or property damage.

STEP 6. Carefully set both hooks of the front glass panel onto the firebox. NOTE: Make sure

the glass fully attached to the firebox so that the control panel can work properly. This will

keep the decorative glass in place and enable the control panel work.