Dynasty Fireplaces EF57US Installations- und Betriebsanleitung für den Hausbesitzer - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für den Hausbesitzer für Elektrischer Heizer Dynasty Fireplaces EF57US herunter. Dynasty Fireplaces EF57US 9 Seiten. Electric heater with remote control
Seite druckenLOCATING YOUR ELECTRIC FIREPLACE
Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing
a location ensure that the general instructions are followed. For best results, install out of direct sunlight.
Power supply service must be either completed or placed within the electric fireplace prior to finishing to
avoid reconstruction.
WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front and sides of the
electric fireplace.
Clearance to Combustibles
Sides ...................................... 0 in. (0 mm)
Floor .....................................
.
Top ........................................0 in. (0 mm)
Back .......................................0 in. (0 mm)
Installation:
1. With front TE1/TE2/TE5
Fireplace
mantel
Wood
panel
Clip
Insert
1.1 Gently push the insert into the front of the mantel.
Screw
ST4x16
1.3 Fix the insert with the mantel panel by 2pcs of
ST4*16 screws.
TE4-36/TE4-36 TE3-40/TE4-40 TE3-42/TE4-42 Other Series
1.7in.(44mm)
W4
Clip
H4
2.7in.(69mm)
Fixing
bracket
D2
Screw
ST4x8
1.2 Fix the fixing bracket onto the fireplace
engine by 2pcs of ST4*8 screws.
Srcrew ST4x8
1.4 Fix the airflow onto the fireplace engine by
4pcs of ST4*8 screws.
1.9in.(49mm)
0 in. (0 mm)
Airflow plate