Autopot APWS212 Einfache Pflegehinweise - Seite 2

Blättern Sie online oder laden Sie pdf Einfache Pflegehinweise für Rasen- und Gartengeräte Autopot APWS212 herunter. Autopot APWS212 2 Seiten. Aquavalve5

Seite drucken
Autopot APWS212 Einfache Pflegehinweise
Contents
easy2Propagate Complete Kit
•
1x Clear easy2Propagate Lid with 4 x Fitted Vents
•
1x 6.6 Gallon FlexiTank
•
1x 1/2" - 3/8" Click-Fit Adaptor and Filter
•
1x AQUAvalve5
•
1x AQUAvalve5 Cover
•
1x 3/8" Elbow Bar
•
5' of 3/8" Piping
•
1x 47" x 21.5" Garden Tray
•
2x Coco Matting 23" x 20" x 1.2"
•
1x Root Control Sheet 46" x 20"
Preparation
•
When using CocoMats please note that they should be treated before use. Place the CocoMat in pH 4.5
water and keep fully submerged to soak for 24-48hrs. Then rinse and use with pH 5.5 water.
•
Submerge the root control sheet in water for 30 minutes.
•
To ensure that your plants receive full levels of light remove protective film from easy2Propagate Lid
Using easy2Propagate without AQUAvalve5
•
Place the CocoMat in the Garden Tray. Place the
root control sheet on top of the CocoMat – gold
face up.
•
Now place small pots or seed trays on the surface
of the root control sheet. Ensure that the pots /
seed tray is flat based and allows the growing
media to make contact with the surface of the root
control sheet.
Using easy2Propagate with AQUAvalve5
•
AQUAvalve5 is only supplied with easy2Propagate
'Complete' and 'Extension' Kits
•
Cut a section out of one corner of the CocoMat using
heavy duty scissors, this is to allow a space for the
AQUAvalve5 and AQUAvalve5 cover to sit on the
Garden Tray.
•
Cut a section out of the root control sheet to allow
access to the AQUAvalve5 and AQUAvalve5 cover.
•
Place the CocoMat in the tray, place the root control
sheet on top of the CocoMat – gold face up.
•
Place the AQUAvalve5 and AQUAvalve5 cover on the
surface of the tray in the space that you have cut out.
Remember that young plants need less food than established ones.
!
Do not connect your easy2Propagate to an AutoPot Watering System that is also feeding established plants.
easy2Propagate Extension Kit
•
1x Clear easy2Propagate Lid with 4 x Fitted Vents
•
1x AQUAvalve5
•
1x AQUAvalve5 Cover
•
1x 3/8" Elbow Bar
•
1x 1/2" - 3/8" Tee Connector
•
1x 3/8" Tee Convertor
•
3.3' of 3/8" Piping
•
1x 47" x 21.5" Garden Tray
•
2x Coco Matting 23" x 20" x 1.2"
•
1x Root Control Sheet 46" x 20"
easy2Propagate Basic Kit
•
1x Clear easy2Propagate Lid with 4 x Fitted Vents
•
1x 47" x 21.5" Garden Tray
•
2x Coco Matting 23" x 20" x 1.2"
•
1x Root Control Sheet 46" x 20"
easy2Propagate Lid Only
•
1x Clear easy2Propagate Lid with 4 x Fitted Vents
(Fits 47" x 21.5" Garden Tray – not included Lid Only option)
(Basic Kit)
•
Water through each seed cell or pot once from
the top to ensure that the capillary action starts
between the surface of the root control sheet and
the media at the bottom of the pot.
•
Pour water into the tray until the CocoMat is 2/3
submerged.
•
Place easy2Propagate Lid onto tray ensuring all
corners are fitted snugly.
(Complete and Extension Kit)
•
Now place small pots or seed trays on the surface of
the root control sheet. Ensure that the pots / seed tray
is flat based and allows the growing media to make
contact with the surface of the root control sheet.
•
Water through each seed cell or pot once from the top
to ensure that the capillary action starts between the
surface of the root control sheet and the media at the
bottom of the pot.
•
Now connect your AQUAvalve5 to your reservoir, fill
the reservoir with water and add nutrients, if required.
•
Place easy2Propagate Lid onto tray ensuring all
corners are fitted snugly.
Setting Up the AQUAvalve5
1
Remove threaded collar
from AQUAvalve5.
Push one end of the ready-
assembled 3/8" Elbow
Bar through the collar and
attach to AQUAvalve5
nozzle.
Then replace the
AQUAvalve5 collar.
3
Cut 3/8" pipe to
appropriate length
if required.
Connect to
3/8" Elbow Bar.
5
Connect to your system using 1/2" or 3/8" fittings.
Propagation Tips
Close vents to generate
When to begin opening
temperature and humidity
Use heat pads under the tray or
Once the seedlings or cuttings
propagation lights above it to warm
have rooted you can begin to
the water and create humidity.
gradually open the vents.
1. We recommend a target temperature
of 70-80°F / 25-30°C with minimum
80% humidity.
Tips
2
Place the AQUAvalve cover
over the AQUAvalve.
The AQUAvalve and
cover should be placed
directly onto the tray.
Ensure the circular spirit
level indicates the tray is
level, adjust if required.
4
Position the 3/8" Elbow
Bar so that it routes out
of the piping port in the
easy2Propagate lid.
Ensure:
• The pipe does not trap
• The lid fits snugly
• AQUAvalve and Cover
still sit flat on the tray.
6
To connect to the
FlexiTank push
1/2"-3/8" Click-Fit
Adapter and Filter onto
the 3/8" pipe.
Then push the Click-Fit
Adapter and Filter onto
the FlexiTank tap.
Hardening off
the vents
Once the vents are fully opened
leave for several days prior to
removing the lid.
2. If you are using raised pots, such as terracotta
pots or bonsai pots, a small length of capillary
matting (not included) can be cut and pushed
inside the hole at the bottom of the raised pot.
The capillary matting will act as a wick.