GalileoSky Base Block Lite Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS GalileoSky Base Block Lite herunter. GalileoSky Base Block Lite 9 Seiten.

Connection of Galileosky Base Block Lite

(version 4 dated from June 25, 2018)

Setting of the Tracking Device

Before using Galileosky Base Block Lite you should carry out its setting in service program

"Configurator" (hereinafter-Configurator). Perform the following actions:

apply operating voltage to the tracking device, connect it to a computer via USB-cable;

ATTENTION!

The tracking device cannot be charged via USB. It should be connected to

external power supply.

run "Configurator" and make sure that the tracking device is detected by Configurator;

go to tab "Settings" -> "Data transmission" (Pic. 5)

set access point of selected service provider, if the fields are not filled, the tracking device



will automatically select a provider from the list in tracking device's archive and will apply

corresponding settings;

set data server and port, which it operates through;



select data transmission protocol, it is recommended to use Galileosky protocol, as it



allows to transmit more data;

click "Apply" button.



Pic. 4

"Device" tab