Emerson ACF765BQ Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fan Emerson ACF765BQ herunter. Emerson ACF765BQ 12 Seiten. 152 cm (60”) damp location ceiling fan
Seite drucken
How To Hang Your Ceiling Fan
WARNING
The fan must be hung with at least 2.1 meters of
clearance from floor to blades (Figure 8).
CEILING
AT LEAST
2.1 METER
FLOOR
Figure 8
WARNING
The ceiling joist must be securely mounted and
capable of supporting at least 31 Kg.
1. Securely attach the hanger bracket to the ceiling
joist using the two screws supplied (Figure 9).
TWO SCREWS
Figure 9
2. Carefully lift the fan and seat the hanger
ball/downrod assembly on the hanger bracket that
was just attached (Figure 9). Be sure the groove in
the ball is lined up with the tab on the hanger
bracket.
WARNING
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
Figure 10
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
How To Wire Your Ceiling Fan
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before wiring.
1. Securely connect the green/yellow earth wires
2. Securely connect the blue fan motor wire and the
HANGER
BRACKET
TAB
3. Securely connect the brown fan motor wire and the
6
NOTE: CEILING COVER, SUPPL Y WIRES AND FAN WIRES
OMITTED FOR CLARITY.
WARNING
WARNING
from the hanger ball and the hanger bracket and
the supply green/yellow earth wire to the terminal
block as shown in Figure 11.
black supply neutral to the "N" terminal of the
connector block as shown in Figure 11.
red (Active) supply wire to the "L1" terminal of the
connector block as shown in Figure 11. After
connections have been made, turn leads upward
and carefully push leads into the recess making
sure there is separation between connectors.
HANGER
BRACKET
HANGER BALL/
DOWNROD
ASSEMBLY
THREADED
STUD (2)
Model No.: ACF765