autoright 4 inch Cordless Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Sander autoright 4 inch Cordless herunter. autoright 4 inch Cordless 16 Seiten. 12 volt, 4 inch cordless detailing polisher

Seite drucken

GENERAL SAFETY RULES

READ AND UNDERSTAND BEFORE USING

!WARNING! Read and understand the user

manual instructions. Failure to follow all

instructions listed below may result in electric

shock, fire and/or serious personal injury.

WORK AREA

1. Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

2. Do not use power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks, which may ignite the

dust and fumes.

3. Keep bystanders, children and visitors

away while operating a power tool.

Distractions can cause you to lose control.

PERSONAL SAFETY

1. Stay alert, watch what you are doing,

and use common sense when operating

a power tool. Do not use tool while tired

or under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

2. Dress properly. Do not wear loose clothing

or jewelry. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewelry, or long hair can be caught

in moving parts.

3. Avoid accidental starting. Be sure switch is

in the OFF position before inserting battery

pack. Carrying tools with your finger on

the switch invites accidents.

4. Use safety equipment. Always wear eye

protection. Dust mask, non-skid safety

shoes, hardhat or hearing protection must

be used for appropriate conditions.

IMPORTANT SAFEGUARDS

4 INcH cOrdLESS

TOOL USE AND CARE

1. Prevent Surface Damage: Always use a

clean bonnet with each project. Before

beginning, check bonnet or pad for foreign

elements, dirt and debris. Dirt and debris

can cause damage to the surface of

a vehicle.

2. Use clamps or other practical ways to

secure and support the work piece to a

stable platform. Holding the work by hand

or against your body is unstable and may

lead to loss of control.

3. Do not force tool. Use the correct tool for

your application. The correct tool will do

the job better and safer at the rate for

which it is designed.

4. Do not use tool if switch does not turn on

or off. A tool that cannot be controlled

with the switch is dangerous and must be

repaired.

5. Disconnect battery pack from tool or place

the switch in the locked or off position

before storing to ensure no accidental

starting.

6. Store idle tools out of reach of children

and other untrained persons. Tools are

dangerous in the hand of untrained users.

7. When battery pack is not in use, keep

it away from other metal objects like:

paper clips, coins, keys, nails, screws, or

other small metal objects that can make a

connections from one terminal to another.

Shorting the battery terminals together may

cause sparks, burns or a fire.

8. Check for misalignment or binding of

moving parts, breakage of parts, and

any other conditions that may affect the

tool's operation. If damaged, have the tool

serviced before using. Many accidents are

caused by poorly maintained tools.

9. Use only accessories that are

recommended by the manufacturer for your

model. Accessories that may be suitable for

one tool may create a risk of injury when

used on another tool.

ENGLISH