Afinia 3D H400+ Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für 3D-Drucker Afinia 3D H400+ herunter. Afinia 3D H400+ 6 Seiten.

Seite drucken

Load Filament

Put filament into the external

spool holder and insert filament into the

guiding tube.

Put the guiding tube into the rubber

ring.

Rubber

Grommet

Rubber

Grommet



Insert filament and guiding tube into

the machine through the hole on the back

door.

Make sure the

section of guiding

tube inside the

machine is no

less than 28 cm.

In the material page, press the circular

material button to switch between different

materials.

After selecting the right material, click

"Extrude". The print head temperature will

be displayed on the status bar on top.

Gently push the filament into the

filament entrance and down until it stops.

After reaching the print temperature,

the printer will beep and start extruding

filament.

Filament

extrusion

Close the top covers and doors.



Push the guiding tube into the filament

entrance and insert the tube into the holding

clip on the mount.

lock the guidng tube at the

tube holder

Insert guiding

tube into the

filament

entrance

Please note that the external spool holder

can only be placed at the following positions.

other locations could adversely affect printing

printing performance.

Top View

Guiding tube

20cm

10cm