Adept Audio AMP200 Installationshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installationshandbuch für Redner Adept Audio AMP200 herunter. Adept Audio AMP200 20 Seiten. Landscape speaker system
Seite drucken
INSTALLING THE SPEAKERS
Positioning and installing the satellite speakers
The satellite speakers may be positioned so that sound is evenly
dispersed around the outdoor space, or you can create as many as four
individual stereo pairs to focus sound on certain parts of the outdoor
space, such as a patio or play area. Alternate left- and right-channel
satellite speakers when you mount them. Typically, best results are
achieved by placing the speakers 6 to 15 feet apart.
Push the mounting spikes for the satellite speakers into the ground.
If the ground too firm to push the spike in all the way, remove the speaker
from the spike and tap the spike in gently with a rubber mallet. Be careful
not to use too much force on the spikes, because they can break.
Adjust the speakers to point upward slightly, but do not point them up
more than 45 degrees or water may accumulate in them, which will
affect the sound.
Positioning and installing the subwoofer
The subwoofer should be placed as close to the middle of the speaker
system as practical, ideally with half the satellite speakers on one side
and half on the other.
You can place the subwoofer directly on the ground, or bury most of it.
The LSUB10 dims are 155/8" diameter x 12" high. For in-ground install, dig
a hole 16" diameter and ~7" deep. Be sure the "grilles" are high enough as
to not get submerged. Make sure the subwoofer enclosure is not in
contact with large rocks, and that there is no empty space around it
when it's buried.
8