Adept Audio IC62TT Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Redner Adept Audio IC62TT herunter. Adept Audio IC62TT 12 Seiten.

Ceiling Speaker Installation Manual

Troubleshooting

No sound from all speakers: Make sure the amplifier and source device (music streamer, CD player, Bluetooth receiver,

etc.) are turned on and music is playing. Check the connections between the source device and the amp to make sure

they are firmly connected and that the cables are in good condition. If all units are on and the connections are good, dis-

connect the AC cord from the amp, wait for 5 minutes, plug it back in and try again.

No sound from one speaker: Check the cable connections on the speaker and the amplifier. If they are good, check the

connection from the source device to the amp, to make sure both stereo channels are connected. If all these connections

are good, twist the speaker to remove it from the bezel ring, then bring it down by the amp. If the speaker works, the

installed cable between the speaker and the amp is damaged and will have to be spliced or replaced. If the speaker still

doesn't work with a direct cable to the amp (but other speakers connected to that amp do work), unplug the AC cable to

the amp, wait 5 minutes, then plug it back in and try the speaker again. If it still doesn't work, contact Adept Audio.

Sound seems unfocused or bass is weak: Check the polarity of the speaker cable connections on the amp and the

speaker. The marked (or white or red) conductor of the cable should be connected to the positive (usually red) terminals

on the speaker and the amp. The unmarked (or black) conductor should be connected to the negative (usually black)

terminals on the speaker and the amp. If the polarity of a connection is wrong, reverse it and listen again.

If you have any questions or concerns about installing or using this product, you can reach us through one

of the following methods:

Phone:

(888) 982-3378

Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri

If you are having technical trouble, please include the model number and briefly explain what steps you took to resolve

the problem in your email, or be prepared to answer these questions over the phone. If you are considering returning the

product, it's required that you contact Adept Audio prior to any return attempts. This way we can determine if the issue can

be resolved without returning the product, or if needed we can provide instructions and support for the return process.