DynaTrap DT1100 Häufig gestellte Fragen - Seite 3

Blättern Sie online oder laden Sie pdf Häufig gestellte Fragen für Rasen- und Gartengeräte DynaTrap DT1100 herunter. DynaTrap DT1100 3 Seiten.

The light bulb should be replaced regularly to ensure optimal UV effectiveness.

Even though the bulb's light may be visible to you, its ability to attract insects diminishes over time.

1. Turn power switch to "off" position. UNPLUG UNIT, and allow bulb to cool before replacing.

2. Remove retaining cage, and turn unit upside down.

3. Remove the four screws securing the fan housing to the light housing. After removing the screws, gently

pull the fan housing away from the light housing. Using a soft brush, remove dirt and debris from the light

housing. Once the cleaning process has been completed, untighten the screw securing the base of the

light bulb to the light housing. Slide the metal bracket to the side. Cover the bulb with a cloth to protect

your finger and hand. Grasp the bulb (with your hand and fingers protected by the cloth) and gently pull

the bulb from the socket.

4. Remove any debris from the lamp socket with a brush before inserting the new bulb. Replace the metal

plate over the base of the bulb and tighten the retaining screw.

5. Align the screw holes in the fan housing with the screw holes in the lighting unit and tighten the screws to

the base of the lighting unit.

6. Replace the retaining cage at the bottom of the unit.

Should I leave the Dynatrap plugged in all of the time?

Yes, the Dynatrap should be left on 24 hours a day 7 days week (except when cleaning).

How long is the cord?

The cord is 10 feet long. If an extension cord is needed the extension cord must be marked with letters

"W-A" and with a tag stating "Suitable for Use with Outdoor Appliances".

How often do I need to empty the retaining cage?

It will depend on your region and time of the year how often you need to empty the unit. The screened

material around the retaining cage will allow you to see if you have the need to empty and clean the

collection chamber. Frequent cleaning will prolong the life of the unit, and provide for efficient trapping

operations. We recommend a once a week cleaning.

How do I clean/empty the Dynatrap?

Frequent cleaning will prolong the life of the unit, and provide for more efficient operation.

1. Be sure to clean the unit once per week

2. Switch the unit off and unplug before cleaning

3. For weekly cleaning, remove the cage by turning it clockwise. Remove any buildup from the inside of the

retaining cage and fan with a brush (included).

4. For major cleaning, remove the four screws securing the fan housing to the light housing. After removing

the screws, gently pull the fan housing away from the light housing. Using a soft brush, remove dirt and

debris from the light housing. Once the cleaning process has been completed, align the screw holes in

the fan housing with the screw holes in the lighting unit and tighten the screws to the base of the lighting

unit.

5. When replacing the retaining cage – DO NOT press / push against the screen windows.

Information provided by Dynamic Solutions Worldwide, LLC