HIGHLEAD GC2268-2BXL Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Nähmaschine HIGHLEAD GC2268-2BXL herunter. HIGHLEAD GC2268-2BXL 11 Seiten. Two needle cylindrical bed compound feed lockstitch sewing machine (rotary)
Seite drucken15. Relationship between needle motion and feed dog motion
1）Set feed length to "0" on the feed setting dial
2） Set the needle at the lowest position.
3）Lean the machine head backward, remove the back cover, loosen screw B and C.
4）Adjust the distance between presser rod and vibration prevention rod to 9 mm.
5）After the completion of adjustment, fully tighten the screws B and C.
Note: At this time make certain that needle can enter the feed dog needle hole at the center
of the hole.
16. Adjusting the height of the feed dog
The max. Height of the feed dog from the surface to the needle plate is normally 1mm.
To adjust this height:
1）Set the stitch length at minimum.
2）Turn the pulley so as to raise the feed dog to it highest position.
3）Loosen the screw"
4）Tighten the screw"
Needle plate
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
", adjust the height of the feed dog .
A
"after adjustment.
A
Feed dog
1 mm
— 8 —