HIGHLEAD GC20528-BDZA Gebrauchsanweisung - Seite 2
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Nähmaschinen-Zubehör HIGHLEAD GC20528-BDZA herunter. HIGHLEAD GC20528-BDZA 18 Seiten. Twin needle split needle bar lock stitcher
Seite drucken1.PRECAUTIONS BEFORE STARTING OPERATION
1)Safety precautions:
（1）When turning the power on, keep your hands and fingers away from the area around/under the needle
and the area around the pulley.
（2）Power must be turned off when the machine is not in use, or when the operator leaves the seat.
（3）Power must be turned off when tilting the machine head, installing or removing the "V" belt, adjusting
the machine, or when replacing.
（4）Avoid placing fingers, hairs, bars etc., near the pulley, "V" belt, bobbin winder pulley, or motor when
the machine is in operation.
（5）Do not insert fingers into the thread take-up cover, under/around the needle, or pulley when the
machine is in operation.
（6）If a belt cover, finger guard, eye guard are installed, do not operate the machine without these safety
devices.
2)Precautions before starting operation:
（1）If the machine's oil pan has an oil sump, never operate the machine before filling it.
（2）If the machine is lubricated by a drop oiler, never operate the machine before lubricating.
（3）When a new sewing machine is first turned on, verify the rotational direction of the pulley with the
power on. (The pulley should rotate counterclockwise when viewed from the pulley)
（4）Verify the voltage and (single or three) phase with those given on the machine nameplate.
3)Precautions for operating conditions:
（1）Avoid using the machine at abnormally high temperatures（35
or lower）.
（2）Avoid using the machine in dusty conditions.
2.SPECIFICATIONS
Model
Max.sewing speed
Application
Stitch length
By hand
Presser-foot
stroke
By pneumatic
Needle size
Lubrication
Motor
Needle gauge
GC20528-MDZA
4000r.p.m
Light weight
0-5mm
DP×5 14#
Automatic lubrication
750W sevor motor
— 1 —
℃
）or low temperatures（5 ℃
or higher
GC20528-BDZA
3000r.p.m
Medium weight
0-7mm
8mm
16mm
DP×5 21#
6.4Standard