Dynaudio Excite X14A Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Dynaudio Excite X14A herunter. Dynaudio Excite X14A 12 Seiten.
Seite drucken
Miscellaneous
Miscellaneous
Troubleshooting
If the Power LED lights green, but you hear
no sound, check your input signal, i.e. by
switching speakers.
Care
Components of the highest quality are used
in your Excite X14A. This assures years
of
trouble-free
precautions should still be made though.
Avoid running the system into severe clip-
ping. Although there is an advanced pro-
tection system, you may be able to destroy
your speakers by severe overpowering
them. The limiter works over a certain
range, but exceeding this level may send
a severely clipped signal to your driv-
ers. When a noticeable distortion occurs,
please turn down the level to your speak-
ers.
Avoid hot-plugging the equipment con-
nected to the monitors. Always turn off the
speaker and other equipment when plug-
ging or unplugging signals, or switching
equipment on or off.
Do not touch the drive units by hand. The
tweeter especially uses a very fine fabric
dome with an ultra-thin coating.
Options
Companion
subwoofers
Dynaudio Excite series are the Sub 250 II
and Sub 600 Precision
Learn more about these subwoofers at:
www.dynaudio.com
8
operation.
Following
for
Subwoofers.
Service
There are no user serviceable parts inside
the monitor. If service is required please
contact service via:
www.dynaudio.com
or
Dynaudio International GmbH
Ohepark 2
21224 Rosengarten
Germany
Tel: +49 4108 - 4180 - 0
the