Dynaudio Focus 20 XD Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Dynaudio Focus 20 XD herunter. Dynaudio Focus 20 XD 15 Seiten.
Auch für Dynaudio Focus 20 XD: Erstmalige Einrichtung (2 seiten)

Seite drucken

Owner's Manual Focus XD

Scope of

delivery

Unpacking

After unpacking, make sure the system is complete and check the device and all

accessories for transport damage. Transport damage may be expected if the packaging is

already severely harmed. Do not attempt to commission a damaged device. If the contents

are incomplete or damaged, please contact your Dynaudio distributor.

Distributor addresses can be found in the Internet at www.dynaudio.com.

Packaging material

The packaging has been designed so that it may be reused if it was not damaged during

transport. Keep the packaging and use the original packaging for all further transport.

Disposal

Disposal of used electrical and electronic equipment (applicable in European countries with

separate collection systems for this equipment).

This symbol on the product or its packaging indicates that the product may not be treated

as household waste. Instead it must be handed over to the applicable collection point for

the recycling of electrical and electronic equipment. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the environment and

human health. The recycling of materials helps to conserve natural resources.

For more detailed information on recycling this product, please contact your local authority,

community waste disposal office, or the shop where you purchased the product.

1. 2 Focus XD loudspeakers (60 XD, 30 XD, or 20 XD)

2 Focus XD loudspeaker cloth covers (not shown)

2. 1 remote control

3. 2 power cables (country-specific version)

1 first time setup manual (quick guide for installation, not shown).

dynaudio.com/focusxd

Spikes with sharp peaks

The floor-standing Focus XD loudspeakers allow for setup with spikes. The sharp peaks of

the spikes may cause injuries and damage sensitive surfaces like hardwood flooring or tile.

►

Be careful when handling the loudspeakers.

►

Place plates between the spikes and the surface to protect the underlying surface.

ATTENTION

Light, heat, electromagnetic radiation

Direct sunlight or excessive brightness can affect the colour of your loudspeakers' natural

wood veneer. Built-up heat can lead to overheating. Electromagnetic radiation of different

devices can lead to mutual impairment to functions.

►

Avoid placing the device in very warm, cold, or humid environments.

►

To maintain the aesthetic quality of your loudspeakers for the long term, placement in

light-intensive, sunny environments should be avoided.

►

Please ensure sufficient ventilation and observe the required distances around the

loudspeakers.

►

Do not place the loudspeakers near devices with strong electromagnetic radiation or

devices that could be destroyed or damaged by magnetic fields.

Unpacking / Setting up