Dynaudio S4-W65 Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Redner Dynaudio S4-W65 herunter. Dynaudio S4-W65 16 Seiten. Studio series
Auch für Dynaudio S4-W65: Installationshandbuch (12 seiten)

Seite drucken

Diagram 4

Multi-channel Audio Speaker Positioning

0.4 m - 0.6 m

(1.3 ft - 1.9 ft)

Left

Note: Dipole mode is selected via a switch on the rear of the

S4-DVC65. Speakers used in Dipole mode must be connected to

only one amplifier channel. The dipole switch should not be used

if a S4-DVC65 is connected to two amplifier channels for use in

stereo.

Note: The directional characteristics of Studio Series in-ceiling

speakers can be optimised by rotating the Speaker Unit within its

Installation Frame and adjusting the tweeter tilt. See Section 4.1 for

more.

Note: Studio Series in-ceiling and in-wall speakers are fully

appropriate for use in 5.1(2), 7.1(2), 9.1(2) multi-channel systems.

Studio Series in-ceiling speakers are suitable for use in Dolby

Atmos

installations.

2018 Dynaudio CI manual - Item No. 307001016932 Rev N - EN.indd 10

>0.5 m

(>1.6 ft)

Left

Centre

>0.5 m

(>1.6 ft)

Centre

Right

<0.5 m

(<1.6 ft)

Surround

Right

Note: The nature of the installation of in-ceiling and in-wall

speakers means that it is sometimes impractical to locate them in

acoustically optimal positions. Compromise is often more likely to

be necessary in multi-channel installations where positions have

to be found for multiple speakers. In these circumstances it is

preferable to favour the position of the front and centre channel

speakers over that of the surround channel speakers.

Surround

>0.5 m

(>1.6 ft)

Alternative wall

surround positions

shown. Surround

positions mirrored on

opposite wall.

05/01/2018 12.39