Dynavector P75 mk4 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Dynavector P75 mk4 herunter. Dynavector P75 mk4 9 Seiten. Phono preamplifier and phono enhancer
Auch für Dynavector P75 mk4: Anweisungen und Spezifikationen (9 seiten)

Seite drucken
Dynavector P75 mk4 Benutzerhandbuch
P75 mk4 Jumper Location and Settings
The P75 can be adjusted to suit any cartridge on the market.
Adjustment is simple. No soldering or extra parts needed.
The different settings are made by changing the position of jumpers on the
Jumper Blocks. The layout of the jumpers is shown below.

Standard / Factory Default Setting

The P75 is shipped from the factory as follows:
Low output moving coil
This setting is perfect for about 95% of low output moving coil cartridges.
100 ohm
63dB gain. Shown below.
3
Tip:
place unused/spare jumpers
half-on (just connected to one
pin). This prevents them
getting lost.