Emerson FB2100 Handbuch für den Austausch von Feldgeräten - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für den Austausch von Feldgeräten für Industrielle Ausrüstung Emerson FB2100 herunter. Emerson FB2100 16 Seiten. Flow computer i/o terminal board
Auch für Emerson FB2100: Handbuch für den Austausch von Feldgeräten (8 seiten), Handbuch für den Austausch von Feldgeräten (14 seiten), Handbuch für den Austausch von Feldgeräten (16 seiten), Handbuch für den Austausch von Feldgeräten (16 seiten)

Seite drucken
Emerson FB2100 Handbuch für den Austausch von Feldgeräten
Replacing the 30W Solar Panel
The procedure for replacing the 30W solar panel on the FB2100/FB2200 Flow Computer re-uses
the existing mounting hardware provided with the original solar panel. Save any mounting
hardware/screws/nuts/washers from the original.
Restrictions
Hazardous area approvals require that any part replaced in the field be the exact same part ("like-
for-like"). Upgrading or substituting different parts violates hazardous area certification.
Refer to the table below for the correct field replacement part number.
Item
30W Solar Panel (does not include mounting hardware)
Solar Controller (SunKeeper-6)
Battery Cable
Solar controller cable
Fuses
Required Tools
Restrictions
The solar panel and lead acid battery combination cannot be used with ATEX/IECEx applications.
WARNING
EXPLOSION HAZARD –Substitution of any components may impair suitability for Class I, Division
2.
WARNING
EXPLOSION HAZARD –Do not disconnect equipment unless power has been removed or the area
is known to be non-hazardous.
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
FB2100/FB2200 Flow Computer 30W Solar Panel Field Replacement Guide
#2 Phillips-head screwdriver
1/8-inch flat head screwdriver
7/32-inch flat head screwdriver (for 3.81 mm pitch terminal block connections)
Hexagonal torque wrenches with 3mm, #1, and #2 Phillips-head bits. Ranges must include
50 to 60 in-lbs (5.6 to 6.8 N-m) and 144 to 168 in-lbs (16.3 to 19 N-m).
Wire cutter
Wire stripper
Utility knife
D301824X012
November 2020
Field Replacement Kit
Part Number
395555-02-7
396992-01-3
399288-01-0
396701-03-0
395829-01-0
1