ADEPT Telecom a.910 Kurzreferenz-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Telefon ADEPT Telecom a.910 herunter. ADEPT Telecom a.910 17 Seiten.

Seite drucken

In this quick reference guide,

indicates a manual operation or a sequence of operations to be performed in an order shown by

PRESENTATION

a.910 is compatible with ADEPT Telecom PBXs and can be connected to the analogue public telephone

network (PSTN). Before connecting a.910 to another type of PBX, please check compliancy with your

equipment supplier.

a.910 is supplied with a removable plastic part which allows the set to be tilted, when used in desk position.

SETTING UP

Before initial use or programming, your a.910 telephone must be powered by three LR6 AA batteries.

They should be placed in the compartment on the underside of the telephone. This compartment can be

opened and closed with a cross-recessed screwdriver. The line cord must be removed before you insert

the batteries for the first time and when you change the batteries. When changing the batteries, it is

advisable to replace them within less than 5 seconds to avoid losing the stored data.

Once you have inserted the batteries, plug the "line" cord into the corresponding jack at the back of the

telephone. This RJ11 / RJ11 cord will be plugged into the supplied telephone socket adaptor.

Plug the handset cord into the corresponding jack on the side of the telephone.

WALL-MOUNTING

The a.910 telephone can be wall-mounted by placing the two supplied wall-mounting screws into the holes on

the underside of the telephone. Insert these screws into the wall, 9 centimetres apart on a vertical axis.

Lift the handset and rotate the clip located below the handset rest. The handset will then be held in place

when wall-mounted.

The handset can also be left on the telephone during a call thanks to a clip on the upper part of the

telephone. The handset has a slot for hanging it on the telephone clip.

PERSONNALISATION

Ringer melody

A switch at the back of the telephone allows you to choose from 3 ringer melodies.

Melody Control

A switch at the back of the telephone allows you to choose from 3 ringer volume levels: High, Medium or

Silence. In the "Silence" mode, the "

Pulse / Tone

The a.910 can operate in Tone or Pulse modes. The mode can be selected with the switch on the underside of

the telephone.

Loudspeaker volume

The loudspeaker volume can be set with the right—hand cursor.

Accessing the "Options" menu

Holding down the "

the

and

buttons. Confirm the selected sub-menu with "

Language selection (French, Spanish, German, Italian, Portuguese, English)

Select the display language with the

a.910 – 07-2005

means "Pick up" and

" call indicator flashes to signal incoming calls.

" button displays the "OPTIONS" menu. Various options can be configured by pressing

and

means "Hang up"

buttons. Confirm with "