DD Audio DM1500 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DD Audio DM1500 herunter. DD Audio DM1500 19 Seiten. Class d monoblock amplifier
Auch für DD Audio DM1500: Benutzerhandbuch (14 seiten)

Seite drucken

STRAP MODE CONNECTION: DM1500/DM2500

STRAP Mode allows the connection of two pieces of the same DM SERIES

amplifier. In STRAP Mode one amp will be designated the MAIN amp and one

amp will be designated the STRAP amp. the MAIN amplifier's pre-amp settings

will control the audio signal for both amplifiers. The outputs of both amps will

work as a single output section. The minimum speaker impedance in STRAP

Mode should be 2 Ohm. Please follow the instructions and diagram carefully for

the correct connection method.

1. Connect the MAIN amplifier to the head-unit and set its MAIN/STRAP switch to the

MAIN position.

2. Set the STRAP amplifier's MAIN/STRAP switch to the STRAP position.

3. Connect the MAIN and STRAP amplifiers via the IN and OUT RCA jacks as shown in

the diagram.

4. Connect SPEAKER terminal ( + ) of MAIN amplifier to subwoofer ( + ) lead wire.

5. Connect SPEAKER terminal ( + ) on STRAP amplifier to subwoofer ( - ) lead wire.

6. Connect SPEAKER terminal ( - ) on MAIN amplifier to SPEAKER terminal ( - ) on

STRAP amplifier.

MAIN Amp

STRAP Amp

DD AUDIO / CLASS D MONOBLOCK AMPLIFIER /

Set MAIN amp's mode

switch to MAIN

Set STRAP amp's mode

to INPUT STRAP