Dynex DX-32L200A12 Firmware-Aktualisierung

Blättern Sie online oder laden Sie pdf Firmware-Aktualisierung für LCD-FERNSEHER Dynex DX-32L200A12 herunter. Dynex DX-32L200A12 2 Seiten. Téléviseur acl de 32 po
Auch für Dynex DX-32L200A12: Handbuch (6 seiten), Wichtige Informationen Handbuch (12 seiten), Spezifikationen (1 seiten), Handbuch zur Schnelleinrichtung (2 seiten), (Wichtige Informationen (12 seiten), (Kurzanleitung zur Installation (2 seiten), (Französisch) Wichtige Informationen (12 seiten), (Französisch) Manual D'installation Rapide (2 seiten)

Tuner Firmware Update Process for Dynex Models DX‐19E220A12, DX‐

1. IMPORTANT: Please completely read these instructions prior to starting your

update process.

2. Determine the proper Rev id by looking at the sticker on the side of the TV (Example

photo below) and write down the Model and Rev id for use later in this process.

3. Insert USB drive to your PC or Mac

4. USB drive being used must not have any folders or additional files on the device.

5. Download the firmware that matches the Model and Rev id of your TV.

6. To download firmware click on the "Support/Downloads" tab; then locate the

corresponding Rev id of your TV.

7. Click on the firmware link titled "Channel Scan Update Rev A" when the pop up box

appears select "Save" and choose the destination of your USB drive.

a. Note: Do

b. Note: This file is <5 Megs in size; download time should be less than 1 minute.

8. Once down load is complete safely remove your USB drive.

9. Disconnect the AC power from your wall outlet for the TV

10. Insert USB device into the SERVICE PORT; located in one of 3 places, back, side or

bottom. The correct port will be labeled either Service or Service/USB. See photo below

32L200A12 & DX‐46L262A12

NOT

change the name of the file.