2. I am programming my universal remote, what code is needed?
Use the following table to obtain the correct remote code:
Note: The brand name is often visible on the front of the universal remote control, and the
o
model number is often visible on the back.
Note: If the universal remote control isn't listed in the chart, refer to your universal remote
o
control's instructions and try codes for other brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith.
Codes for other universal remotes are available online at:
o
http://www.dynexproducts.com/universalcontrolcodes.aspx
Follow your universal remote control's instructions to enter the code.
If you are using cable connected directly to the TV:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press ◄ or ► to select Cable.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
If you are using an antenna:
1. Press MENU. The on-screen menu opens.
2. Press ◄ or ► to highlight Channel, then press ▼. The Channel menu opens.
3. Press ◄ or ► to select Antenna.
4. Press ▲ or ▼ to highlight Auto Scan, then press ENTER. A confirmation box
opens.
5. Press ◄ or ► to select Yes, then press ENTER to start the scan. A progress
box shows the progress of the scan.
Dynex TV codes for universal remote controls
(for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control manufacturer and model
Philips
RCA
PHDVD5,
RCU807
PH5DSS,
PMDVR8,
PDVR8
115
135
Set-top box manufacturer and model
Comcast
Dish
M1057
Network
VIP508,
VIP622
0463
720
One for
Sony
All
RM-VL600
URC-
6690
0464
8043
Motorola
TIVO
DRC800
Series 3, HD
0463
0091
DirecTV
RC23
10463
2
Seite drucken