HighSecLabs SM80N-4 Handbuch zur Schnellinstallation

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter HighSecLabs SM80N-4 herunter. HighSecLabs SM80N-4 2 Seiten. Secure km switches
Auch für HighSecLabs SM80N-4: Benutzerhandbuch (15 seiten)

Seite drucken
Quick Installation Guide
2/4/8 Ports High Security KM Switches
Objectives
•
This guide includes instructions for installing HSL SM20N-4,
SM40N-4, SM80N-4 KM devices.
•
A KM allows sharing keyboard, mouse, audio and USB
peripherals between multiple computers.
•
For further assistance please refer to HSL website:
http://www.highseclabs.com.
SM40N-4 Model is shown
 Connect peripherals to the KM
Console ports
•
Keyboard: Connect a USB keyboard
to the corresponding KM console
keyboard port.
Mouse: Connect a USB mouse to the
•
corresponding KM console mouse port.
Note: authentication devices such as
smartcard and biometric readers are enabled
by default, other devices must be explicitly
whitelisted – for further information please
refer to the KM Administrator's guide.
 Connect computers to the KM
Computer ports
Computer keyboard & mouse
•
connection: Connect each computer
to the KM keyboard & mouse computer
port using a USB A to USB B cable.
Connect the USB A end to the computer
and the USB B end to KM.
•
Computer video connection:
Directly connect a monitor to each
computer. Multi-monitor computers
require driver installation (currently
available only for Windows -
highseclabs.com/downloads/km-multi-
display-drivers/).
 Power ON your system
•
Power ON the system:
Connect all peripherals and computers
to the KM prior to powering it up. Power
ON the KM by plugging it to the DC outlet.
By default, after product power-up,
the active channel will be computer #1,
indicated by the applicable front panel
push button LED lit.
©2023 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
3
Note: Power ON self-test: As the product
powers-up it performs a self-test procedure.
In case of self- test failure for any reason,
including jammed buttons, the product will be
Inoperable. Self-test failure will be indicated
by abnormal LED behavior – for further
https://
information please refer to the KM setup guide.
 Switching between computers
•
Switch between computers by pressing
the corresponding front panel button
on the KM. The front panel button of
the selected computer will illuminate.
SM20N-4 • SM40N-4 • SM80N-4 | QUICK INSTALLATION GUIDE
General
•
Verify that all peripherals and computers are turned off prior to
connecting them to the product.
•
The KM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KM to
the Console ports.
– Connect computers that require access to the shared
peripherals to the Computer ports.
1
4
2
HLT31892 Rev. 1.0