HighSecLabs SM80NU-N Handbuch zur Schnellinstallation
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Schalter HighSecLabs SM80NU-N herunter. HighSecLabs SM80NU-N 2 Seiten. 2/4/8 ports km switches
Auch für HighSecLabs SM80NU-N: Handbuch zur Schnelleinrichtung (16 seiten)
Seite drucken
Quick Installation Guide
2/4/8 Ports KM Switches
Objectives
• This guide includes instructions for installing HSL SM20N-N, SM40NU-N, SM80NU-N KM devices.
• A KM allows sharing keyboard, mouse, audio and USB peripherals between multiple computers.
• For further assistance please refer to HSL website: http://www.highseclabs.com
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KM to
the Console ports.
SM40NU-N Model is shown
Connect peripherals to the KM
Console ports:
• Keyboard: Connect a USB keyboard
to the corresponding KM console
keyboard port.
• Mouse: Connect a USB mouse to
the corresponding KM console
mouse port.
• Audio out peripherals: Connect
headphones / speakers to the
KM console audio-out ports
(colored green).
• USB peripherals: Connect USB
peripherals to the KM console USB ports.
• Audio in peripherals: Connect a
microphone to the KM console audio-in
ports (colored pink).
Note: In SM80NU-N model the USB console
ports are situated on the product's front
facing panel. SM20N-N model do not have
USB console ports.
Connect computers to the KM
Computer ports:
• Computer keyboard & mouse
connection: Connect each computer
to the KM keyboard & mouse computer
port using a USB A to USB B cable.
Connect the USB A end to the computer
and the USB B end to KM.
• Computer audio connection:
Connect each computer to the KM
audio-in and audio-out ports using an
audio cable.
Connect one end of the cable to the
computer's audio port using the 1/8"
(3.5mm) stereo plug. Connect the other
end of the audio cable to the KM audio-
in/audio-out computer port.
©2017 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
SM20N-N • SM40NU-N • SM80NU-N
– Connect each computer that requires access to the shared
peripherals to a Computer port group.
– Make sure that every computer is connected to a separate
Computer port group.
– Computer port group numbers are represented by push
buttons on the product's front panel.
– Switch peripherals between computers by pressing the push
buttons on the product's front panel.
1
3
• Computer USB peripherals: Connect
each computer to the KM USB computer
port using a USB A to USB B cable.
Connect the USB A end to the computer
and the USB B end to KM.
• Computer video connection:
Directly connect a monitor to each
computer. Multi-monitor computers
require driver installation, currently
available only for Windows (http://
highseclabs.com/dl.php?fid=446).
Power ON your system:
• Power ON the monitor: Make sure
that the monitor is turned ON prior to
powering ON the KM.
• Power ON the system: Connect all
peripherals and computers to the KM
prior to powering it up. Power ON the
| QUICK INSTALLATION GUIDE
4
3.0
2
KM by plugging it to the AC wall outlet.
By default, after product power-up,
the active channel will be computer #1,
indicated by the applicable front panel
push button LED lit.
Note: Power ON self-test: As the product
powers-up it performs a self-test procedure.
In case of self- test failure for any reason,
including jammed buttons, the product will be
Inoperable. Self-test failure will be indicated by
abnormal LED behavior – for further information
please refer to the KM setup guide.
Switching between computers:
• Switch between computers by pressing
the corresponding front panel button
on the KM. The front panel button of
the selected computer will illuminate.
HDC15320 Rev. 1.0