HighSecLabs KM Admin Tool Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Hardware HighSecLabs KM Admin Tool herunter. HighSecLabs KM Admin Tool 15 Seiten.

Seite drucken

Creating a Custom Layout File Using the KM Admin Tool

13. In this example, fill in as follows:

•

For Display 1 (Primary), type 24 for Display Diag and

1920 and 1080 for Display Resolution (H/V). The MS

H/V Coordinates for Display 1 (Primary) are: 0 and

0. This is because their point of reference is the

starting point, at the top left corner of the primary

display.

•

For Display 2 – the secondary display – type 24 for

Display Diag and 1920 and 1080 for Display

Resolution (H/V). The secondary display is to the

LEFT of the primary display, so, for Display 2, type

the SECONDARY display's HORIZONTAL value as:

(MINUS) -1920 and the VERTICAL value as: (PLUS) 0.

KM Admin Tool | USER MANUAL

14. At the bottom, click Next Step.

The Place the displays dialog opens, showing all

computers configured:

15. Using the mouse cursor, drag the displays to look like the

desired layout. Note: When dragging each display to its

adjacent display, make sure it turns red. Then, move it

backwards so that it "sticks", without being red.

In this example, it should look as follows: